Expert Answers about Toyota

• Options for Front Mount Hitch 1987 E-350
• etrailer does not have a confirmed custom fit front mount hitch for a 1987 E-350 listed; I checked with our suppliers, they do not manufacture a front mount for this specific vehicle. I suggest consideration of one of the universal mount hitches such as Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2", # C13701. Or the Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2" Receiver - 44" Wide, # C47CR. Either of these options may require additional fabrication...
  view full answer...


• Hitch-Mounted Carrier With Ramp For Scooter Or Motorcycle
• We have exactly what you are looking for. The Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 77" Long # UF48-979033 is a nice carrier that has proven to be a very useful when trying to transport small motorcycles or scooters. The weight capacity is 500lbs and it comes with a 37-1/2" long ramp to ease loading or unloading bikes. I recommend adding Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2 # EM05729 to secure the bike to the carrier. It...
  view full answer...


• Availability of Solid Ball Mount with 8 Inch Drop
• It sounds like you're looking for a completely solid shank ball mount for a 2" hitch that also has an 8" drop; I am not aware of anything like this being on the market since there are some challenges with manufacturing a solid ball mount with that large of a drop. Your best bet is going to be using something like the Curt Ball Mount for 2" Hitches - 7" Rise, 8" Drop - 9-3/8" Long - 12,000 lbs # C45448, which has an 8" drop and is made from solid steel. This does have a 1-1/4" hole for the...
  view full answer...


• Parts Needed to Add Brakes to a Trailer with 2,000 lb Axle Spindles
• Since the spindles you have installed are BT8 2,000 lb axle spindles without brake mounting flanges you are going to need the hubs part # AKHD-545-2-EZ-1K which you'll notice has a 5 bolt wheel bolt pattern. This is because the 4 bolt pattern isn't available with a hub/drum. Then for brake assemblies you'd want the set # AKEBRK-2, for brake flanges part # 4-34, and then for new wheels I attached a link to a page that has everything we offer with the 5 on 4-1/2 inch bolt pattern.
  view full answer...


• Rear Bumper Availability For 1993 Ford F-150 Flare Side
• The Westin Fey Surestep Rear Bumper - Chrome Plated Steel # 76001 is not a confirmed fit for your 1993 F-150. If you had the standard style bed then I would recommend going with Westin Fey Surestep Rear Bumper Chrome Plated Steel # 21002-92230 which is a confirmed fit for 1993 Ford F-150. However, since you mentioned that your F-150 is a FLARE SIDE then this will not work; there are not any bumpers available that are compatible with flare side models.
  view full answer...


• Carr LD Custom Fit Side Step Nerf Bars For 2021 GMC Canyon
• It looks like you are referring to Carr LD Custom Fit Side Steps - Black Powder Coated Aluminum - 14" Step - 1 Pair # CARR113331. This comes as a pair of 2 black steps and is confirmed to fit your 2021 GMC Canyon crew cab and extended cab models. The part number you linked is Carr LD Custom Fit Side Steps - Polished Aluminum - 14" Step - 1 Pair # CARR113332 which is the polished aluminum version. I attached demonstration videos for you.
  view full answer...


• Is There a 14 Inch Diameter Tire That is Also a Load Range E or Higher
• I may have a solution for you, but I'm not aware of a 14" trailer tire existing with these specs (Load Range E and 14 ply). The highest rated 205/75r14 tire we have is the Westlake ST205/75R14 Radial Trailer Tire - Load Range D # 274-000012 which is rated for 2,040-lbs per tire and is an 8 ply tire. These are radial tires, so they're well suited for highway travel and would do just fine on your cross-country trip. Most tires this size top out at Load Range D and have no more than 8 ply. In...
  view full answer...


• Roadmaster Brite-Lite Wiring 3-to-2 Converter
• I recommend the Roadmaster Brite-Lite Converter # RM-732, this converts a 3 wire electrical system to a 2-wire system.
  view full answer...


• Availability to Extend Distance Of Trailer Hitch For Towing a Toy Hauler Without Using an Adapter
• If you are using a weight distribution hitch we have an Extended Weight Dist Shank # EQ90-02-4600. This shank is 6" longer than typical shanks that are included with a weight distribution hitch. It is 14" from the center of the receiver hitch pin hole to the center of the mounting holes for the weight distribution head. You will need to verify that your vertical bolt holes are 3/4" in diameter and have a 1-1/4" incremental height measurement. We also have the Brophy Ball Mount for 2"...
  view full answer...


• Availability of Provider 215/75R17.5 Radial Tire with 17-1/2 White Mod Wheel 8 on 6.5 Lug Pattern
• We have the Provider 215/75R17.5 Radial Tire w/ 17-1/2" White Mod Wheel # TA96MR. This is the same as the Provider 215/75R17.5 Radial Tire w/ 17-1/2" Silver Mod Wheel # TA95ZR with being a white wheel. Both have the same tire, bolt pattern of 8 on 6-1/2" and 4.76" pilot hole diameter.
  view full answer...


• Recommendation For Getting Power To A Trickle Charger On A Trailer With A 4 Flat Plug
• The best way to accomplish what you want this to do will actually be to upgrade the 4 Flat plug on the trailer to a 7 Way. If you use something like the Hopkins # H20046, you will not need to connect all the wires. You will just need to match your blinker/brake signal, running light, and ground wires to the ones on the plug and them run the black wire to the trickle charger. A junction box like the # 38656 will also make this task a lot easier. If you do prefer to keep the 4 Flat on the...
  view full answer...


• Fulton Fold-Away Coupler Hinge For a 3 X 3 Trailer Tongue
• We do have a Bolt-On Fulton Fold-Away Coupler Hinge Kit # FHDPB330301 and Weld-On Fulton Fold-Away Coupler Hinge Kit # FHDPW330300 that will fit your 3" X 3" trailer tongue.
  view full answer...


• Rain Gutter Extension For 2015 Winnebago
• The Camco RV Rain Gutter Extensions, # CAM42123 fit most gutters currently being installed by OEM's however, we do not have the ability to pull build sheets on RV's and identify exactly the gutter has been installed. If your gutters look like or similar to the one in the attached image, the Camco RV Rain Gutter Extensions, # CAM42123 will work.
  view full answer...


• Denver Mattress Rest Easy Euro Top Mattress Height Options
• Yes, the Denver Mattress Rest Easy Euro Top Mattress, # DE36ZR is listed at 9" in height. The, # DE79ZR is 5" if you need a mattress with less height. While a 9" mattress will not be best fit for some campers, it may fit for others and be preferred. That is why we try to have as many options as reasonably possible for our neighbors to select from. Happy Camping.
  view full answer...


• Carbon Monoxide and Propane Gas Detector Availability
• The Atwood RV carbon monoxide and propane gas detector you mentioned is no longer made so we are unable to get it at this time but we do have the similar white part # RS34FR which would also work great.
  view full answer...


• Recommendations For A 40" Long Side Pad That Is 12" Tall
• Though we do have the Horse Trailer Side Pad # HTP1260BK that is 60" x 12", the widest 40" option we have will only be 9" ( # HTP40BK). What is going to be your best bet is to go with the Horse Trailer Escape Door Pad # HTP12BK, which measures 12" wide x 9" tall and turn it to be 12" tall by 9" wide. You can then run 4 of them side by side to get you 36" or 5 of them to get you 45". Not the prettiest solution, but it will work.
  view full answer...


• Is There a 30 Amp, 12 Volt Power Converter
• We do have a 30 amp, 12 volt power converter, including one that can be used for either lithium or non-lithium batteries: - Progressive Dynamics 9300 Series RV Converter Charger - 12V - 30A # PD49RR
  view full answer...


• Class 2 Receiver Hitch Availability For 2014 Nissan Altima
• I have confirmed that the Curt Trailer Hitch Receiver I - 1-1/4" # C11352 is a good fit for your 2014 Nissan Altima. This is a Class 1 hitch; there are currently no class 2 hitches available for the 2014 Nissan Altima. This is mainly due to the fact that this vehicle is not meant for towing a trailer, and the class 1 # C11352 will be able to handle everything your Altima is capable of doing. This hitch has a max towing capacity of 2000lbs and a max tongue weight of 200lbs, which will...
  view full answer...


• Which Valterra Master Blaster Does a Better Job the Flexible or Rigid
• The flexible Tank Wand part # A01-0187VP is going to be able clean better than the fixed since you can more easily push it down into plumbing and manipulate it to get it to clean where you want it than the rigid # A01-0184VP.
  view full answer...


• Recommended Thule Snowboard Carrier for 2 Snowboards
• I may have a solution for you, but the Thule 575 Snowboard carrier has been discontinued for some time and is no longer available. Instead, you could use the Thule SnowPack Ski & Snowboard Carrier - 4 Skis or 2 Boards - Silver # TH7324, which is also designed to be able to carry 2 snowboards and will fit on the same types of crossbars. This would be the currently closest available Thule carrier that would have the same specs as the 575. I've linked a review video of this carrier for you...
  view full answer...